To Next Page
E
Erika RobinsonJul 27, 2025
How to charge the Numatic Scrubber battery?
- HhevansJul 27, 2025
To fully charge the Numatic Scrubber battery, it needs to remain plugged in for 6 hours.
How to charge the Numatic Scrubber battery?
To fully charge the Numatic Scrubber battery, it needs to remain plugged in for 6 hours.
What to do if only the red light stays on on my Numatic TTB 1840 Scrubber?
If only the red light remains on, the operator needs to replace or recharge the Numatic Scrubber's battery.
Why Numatic TTB 1840 battery pack needs to be fully discharged and recharged?
The battery pack of the Numatic Scrubber needs to be fully discharged and recharged for a few cycles, and the brush slightly worn, before reaching its maximum efficiency.
What to do if Numatic Scrubber has an internal short circuit?
If the Numatic Scrubber has an internal short circuit, remove the plug from the socket.
What does it mean if the yellow LED is flashing on my Numatic TTB 1840?
If the yellow LED light is flashing on your Numatic Scrubber, the battery is not connected.
General