233970 (Page 42) 10/11 (A13)
Machine Charging
Insert the charging lead required for your country into the charger.
all meter lights are illuminated (Fig 54).
top to bottom.
illuminated, the operator should either replace or charge the battery.
To ensure a full charge, the battery should be left for a period of 6 hrs.
Meaning
First phase of charge in progress
Second phase of charge in progress
End of charge or maintenance phase
the charging cycle
Unsuitable battery or charging malfunction
Internal short circuit
the charging cycle
Battery not connected
INITIAL TEST
or AGM batteries
the simple steps below:
Under normal daily usage:
Recharge batteries after each use
regardless of machine operation
Connect the charger unit to the
battery and plug the charger into a
Spare replacement batteries are available from your supplier.
Fig 53
Fig 54
Fig 53a
To Next Page
Loading...
Need help?
General