9
Featuring the new OBS (Octagonal Brush System);
the brushes simply push-t up onto the chucks
making tting and removal a simple process.
Pull the side pod adjustment lever and set to the top position (Fig.10).
The side pod will now pull open (Fig.11).
Fit middle brush rst (brushes will click-t onto the OBS drive chuck).
Fit outer brush next on both sides.
Close side pod and while keeping the side pod pushed in, set to
appropriate width (see setting the width) (Fig.12).
Safety gloves are recommended for the changing of used brushes.
Owning the TTV-678 ride on scrubber dryer is like having 3 machines in one.
With three width-settings the operator can quickly adapt the machine to any cleaning situation;
without the need for any tools. The machine can be set to clean anything from a narrow corridor to
a large warehouse. The TTV-678 is a totally versatile machine.
Fig.10 Fig.11
Fig.12
Machine Set Up
Fitting the brushes
To Next Page