Nuna PIPA rx User Manual

55PIPA rx instructions54 PIPA rx instructions
Recline Adjustment
(continued)
Check the Installation
After recline adjustment, check
that the child restraint is still
securely attached to the base by
pulling up on the handle.
Releasing Child Restraint
from RELX
™
Base
1
- To release the child restraint,
squeeze the child restraint
release button (1) located on
the base, then pull the child
restraint up (2).
Uninstalling RELX
™
Base
When Installed with Rigid Latch:
2 - Squeeze the rigid latch release
buttons.
3 - Pull the base off of the bars.
4 - Rotate the rigid latch back into
storage position.
When Installed with Lap and
Lap/Shoulder Belt:
5 - Lift the lock off release button.
6 - Unbuckle the vehicle belt and un-
route the shoulder and lap belt
from the base. Remove the base.
2
1
1
2
3
4
5
6

Nuna PIPA rx Specifications

General

Product Type	Infant Car Seat
Weight Capacity	4 to 32 lbs
Height Capacity	Up to 32 inches
Canopy	UPF 50+ canopy with flip out eyeshade
Harness	5-point harness
Base Compatibility	PIPA series base
Safety Features	Side impact protection
Safety Standards	FMVSS 213
Compatibility	Nuna strollers with adapters
Installation	Belt path or with base using True lock™ base installation
Weight of Car Seat	7.6 lbs (without base)