Child Restraint Only
Install (continued)
1
- Tighten vehicle belt while
pushing child restraint firmly
into vehicle seat. Lock the
vehicle belt. Refer to vehicle
owner’s manual for instructions.
If you cannot lock the vehicle
belt, you must use the provided
locking clip (p.60).
Tension the vehicle belt as
much as possible, checking that
it is not loose or twisted.
Check Installation
Blue line must be level with
ground.
Vehicle belt must be buckled,
tight and must stay locked.
Child restraint should be stable
and not move side to side more
than 1 inch at belt path.
PIPA rx instructions
1
5958 PIPA rx instructions
To Next Page
