EasyManuals Logo

Nuna revv User Manual

Nuna revv
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
Infant Insert Wedge
The insert MUST be removed once the child reaches 11 lb. The insert wedge can further
improve the harness fit and recline angle for smaller infants.
When rear facing, the harness MUST be positioned AT or JUST BELOW the child's
shoulders. If the harness straps are positioned ABOVE the child's shoulders, use the infant
insert wedge to adjust the fit.
1 - To remove infant insert wedge, pull the top section of the infant insert forward.
2 - Undo all of the snaps on the infant insert wedge.
3 - Pull up to remove.
29REVV
instructions
28 REVV
instructions
1
2
3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nuna revv and is the answer not in the manual?

Nuna revv Specifications

General IconGeneral
Weight capacity5 to 40 lbs (rear-facing); 25 to 40 lbs (forward-facing)
OrientationRear-facing and forward-facing
Recline positionsMultiple recline positions
Harness type5-point harness
TypeConvertible car seat
Height Limit (Rear-Facing)Up to 43 inches
Height Limit (Forward-Facing)Up to 43 inches
Safety featuresEnergy-absorbing foam, side impact protection
UsageInfant to toddler

Related product manuals