EN
EN
Headrest Adjustment
There are 8 headrest positions.
1 - With harness loose, squeeze headrest button
and move headrest up or down to desired
position.
Release headrest button and slide headrest
slightly up or down until locked into position.
The headrest will click when it locks.
CHECK that headrest is locked on both
sides by pulling firmly up and down.
Recline Use
2
- There are 4 recline positions.
3 - Press recline button (1) on either side of the
child restraint and tilt seat to desired recline
position (2).
Release recline button, and check that child
restraint is locked in desired recline position.
To change recline position after installation,
you MUST uninstall child restraint, select new
recline position, and then reinstall child restraint.
1
2
5
26
1
27
2
1
2
3
4
3
ROYL
™
instructions ROYL
™
instructions