Icon Description
Weekly schedule.
Active groups.
Standby active.
WEEKLY PROGRAMMING
:
This page serves to set the days off for the
machine and the days in which its automatic
switch on and off functions are programmed.
When the page is opened it will show the con-
figuration of the first day of the week (Monday).
Turn the rotary switch to view the configuration
for the days until the last day of the week, after
which select with the
Menu
and
Home
icons.
The operation is cyclical.
Weekly program
Monday
Times ON Times OFF
00:00 00:00
To change the configuration for one day, this
day must be shown on the display and then the
rotary switch must be pressed.
After selecting the option with the rotary switch,
confirm by pressing.
At this point, an icon
/ will be
selected to signal if that day there is a pro-
grammed switch on or off time (
) or not
(
).
To save changes, press the rotary switch. At this
point, the day is active, the hours will start to
flash for the ON time.
Weekly program
Monday
Times ON Times OFF
00:00 00:00
Turn the rotary switch to view and change the
setting.
Turn the rotary switch to view and change the
setting.
Press the rotary switch to store the setting and
pass on to change the minutes for the ON time.
The previous procedure is repeated with min-
utes and hours for the ON and OFF times.
Once the minutes have been saved for the OFF
Weekly program
Monday
Times ON Times OFF
00:00 00:00
Weekly program
Sunday
Programmable day example:
OFF day example:
To Next Page
Loading...
Need help?
General
