56
ENGLISH
7.2.3
SET POINT
TEMPERATURE
Use the rotary switch to move to the "Set point
temperature" and press to enter:
4 options will be displayed:
Icon Description
Group setpoint
(T3 version only).
Setpoint caldaie
(solo versione T3).
Steam boiler setpoint.
Cup warmer.
GROUP SETPOINT (T3 version only)
:
The display will show:
Group offset
1.0
1.0 1.0
3
Use the rotary switch to select the coffee group
to adjust and confirm by pressing.
Turn the rotary switch to select the required
temperature for the group, then press to con-
firm.
Group 1 example:
GROUP OFFSET ADJUSTMENT:
From the screen:
Hold down the washing key
to access
offset and group temperature adjustment.
The next screen will be:
With the rotary switch it is possible to select the
group offset to be adjusted and press to pro-
ceed.
Use the rotary switch to adjust the value of the
group offset and then confirm with by pressing
the switch.
At this point, it is possible to adjust the offset of
the other groups with the same procedure or to
select
Menu
or
Home
.
This setting is reserved to qualified service
engineers.
Group setpoint
93.8
94.0
92.8
93.8
92.892.0
Group temperature
Group setpoint
3
To Next Page
Loading...
Need help?
General
