CAUTION
RISK OF BURNS OR SCALDING
50
ENGLISH
6.2 SELECTION
CONFIGURATION
Set the desired function on the available keys
placed above the filter-holders (see chapter
“DESCRIPTION”).
Fig. 26
BUTTONS KEY
(Selection configuration)
1 small coffee
2 small coffees
1 long coffee
2 long coffees
Continuous
6.3 MAKING COFFEE
Unhitch the filter-holder and fill it with one or
two doses of ground coffee depending on the
filter used.
Fig. 27
Press the coffee with the provided coffee pres-
ser, dust off any coffee residue from the rim of
the filter (this way the rubber gasket will last
longer).
Insert the filter in its unit.
Press the desired coffee button:
By starting up the coffee brewing procedure the
unit’s pump is activated and the unit’s solenoid
valve is opened.
By pressing it, the button will turn on and signal
the operation
NOTE: when in pause, leave the filter-holder
inserted in the unit so that it will keep
warm. To guarantee the utmost thermic
stability during use, the delivery units
are thermo-compensated with comple-
te hot water circulation.
6.4 USING STEAM
Fig. 28
While using the steam nozzle, you must pay
attention to not place your hands beneath it
or touch just after it has been used.
1 small coffee
2 small coffees
1 long coffee
2 long coffees
To use steam just pull or push the provided
lever (Fig. 28).
By pulling it completely the lever will hold a
position of maximum delivery; by pushing it, the
lever will automatically give way.
The two steam nozzles are articulated to gua-
rantee their easy use.