ADJUSTING LIGHTING INTENSITY
KEYBOARD
• Access programming according to the rela-
tive procedure.
• Adjust the light intensity of the keys by pres-
sing the first unit’s 1 long coffee key
more than once.
NOTE: To exit programming press the
key.
ACTIVATING LEVELLING PUMP
• Access programming according to the rela-
tive procedure.
• Press and keep pressing the 1 long coffee
key belonging to the second unit.
• To set the activation of the pump during
levelling, once the programming state has
been activated, keep the second unit
key pressed.
The second unit key will light up and
by means of the first unit key the
pump setting will be visualized: if it is lit up
the pump will function during levelling; if it is
not lit up the pump will not be activated
during levelling.
By pressing the first unit key the pump
setting during levelling can be modified.
NOTE: to exit the programming press the
key.
DOSE PROGRAMMING
In the Aurelia Esse version only the doses of
water and timed steam can be programmed.
To access the programming state you must:
• press the cup-warming key for five
seconds.
• The selection keys and the 1 long coffee key
belonging to the first unit will start to
flash on and off while the other delivery keys
of the other units will turn off.
HOT WATER
• Once the programming state has been
accessed, by pressing the key,
hot water delivery will be activated; once the
desired dose has been reached press the
key again and the set delivery time
will be stored in the control unit.
TIMED STEAM
• Once the programming state has been
accessed, by pressing the key,
hot water delivery will be activated; once the
desired dose has been reached press the
key again and the set delivery time
will be stored in the control unit.
7.4 PROGRAMMING
AURELIA ESSE
60
ENGLISH
To Next Page
Loading...
