Nuova Simonelli PRONTOBAR - 8 Special Machine Scaling Functions; Scaling Functions; Resetting the Cleaning Filter Litre Counter; Resetting Washing Cycles

54
EN
8. SPECIAL MACHINE
SCALING FUNCTIONS
This function allows you to reset the total amount of
water used.
Proceed as follows:
• Release voltage by turning the main switch
off (OFF).
• •Reinstate voltage by turning the main switch
on (ON) and pressing down on the key:
• until the display reads
This function makes it possible to reset the total
number of washing cycles.
Proceed as follows:
• Release voltage by turning the main switch
off (OFF).
• •Reinstate voltage by turning the main switch
on (ON) and pressing down on the key:
8.1 RESETTING THE
CLEANING FILTER
LITRE COUNTER
8.2 RESETTING WASHING
CYCLES
• until the display reads
• Release voltage by turning the main switch
off (OFF).
• Reinstate voltage by turning the main switch on
(ON) and simultaneously pressing down on the
keys ENTER
and RESET ;
• until the display reads:
This function makes it possible to activate the motor
manually forming the automation of the manual cof-
fee delivery group. Proceed as follows:
• Release voltage by turning the main switch
off (OFF).
• Reinstate voltage by turning the main switch on
(ON) and simultaneously pressing down on the
keys ENTER
and ;
• until the display reads:
8.4 HANDLING MANUAL
COFFEE DELIVERY
GROUP
IMPORTANT: When the machine is switched
on, since the arrow key
is
used to access this site, the piston
will automatically start to move
downwards.
• Press the arrow key
to move the piston
DOWNWARDS.
• Press the arrow key
to move the piston
UPWARDS.
• Release and reinstate voltage using the main
switch to end the procedure.
This function makes it possible to remove incorrect
functioning data and to reinstate the Standard
Programming settings (see PRESET SETTINGS
chart).
Proceed as follows:
8.3 RESETTING MACHINE
PARAMETERS
Manual Movement
Reset H2O fi lter
Please Wait
Reset Clean
Please Wait
Please Wait
Preset Data