EasyManua.ls Logo

Nuova Simonelli PRONTOBAR - Calibration Procedures

Nuova Simonelli PRONTOBAR
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fig. 30
Fig. 29
56
EN
CAUTION
RISK OF BURNS OR SCALDING
Set the machine to the “O” energy level.
Insert the key in the lock.
Turn the key to open the hatch anticlockwise.
• Open the front hatch.
9.4 COFFEE HOLDER AND
COFFEE DELIVERY
UNIT CLEANING
5. Open the ground coffee conveyor hatch.
6. Insert the cleanser tablet (puly Caff) and close
the hatch
4. Press the
key and hold it down for about 5
seconds until the following message appears:
7. Press the key again.
The display will read:
WARNING
In case the “WASHING” key has not been pres-
sed, after approximately 20 seconds the machine
will automatically start a washing cycle.
NOTE: During the washing cycle the dose keys are
disabled.
At the end of the washing cycle, the display
will read:
Place a container with water in it, press the
WASHING
, key; the machine will carry out a
rinsing cycle and the display will read:
NOTE: During the washing and rinsing cycles kee-
ping a container under the delivery unit is
advisable or empty the water collector once
the wash and rinse cycles have been com-
pleted.
After the washing cycle is finished, the machi-
ne will return to the following state:
9.3 REINSTATING AN
INTERRUPTED
WASHING CYCLE
Should the washing cycle be interrupted by
electricity failure, when the appliance is next
turned on the unit will be in rest position and
the display will read:
Press the WASHING key again, in order to
repeat the procedures described above in the
paragraph “CLEANING OF THE DELIVERY
GROUP AND CAPPUCCINO MAKER”.
Insert Cleaner
Press Clean
CLEAN
RINSE
Press Clean
RINSE
SELECT
PRODUCT
PLEASE CLEAN

Other manuals for Nuova Simonelli PRONTOBAR

Related product manuals