53
EN
VOLUME CC (Water Volume):
It is possible to set the volume of the water for the
coffee in cc.
Pressing ENTER
it is possible to enter the
sub menu; the
keys are used to
increase/reduce water volume.
Press ENTER
to confirm settings.
PRE-BREWING (Pre-infusion Time):
It is possible to set the pre-infusion time in sec.
Pressing ENTER
it is possible to enter the
sub menu; the
keys are used to
increase/reduce pre-infusion time.
Press ENTER to confirm settings.
TAMPING (Pressing):
It is possible to enable/disable pressing (YES or NO).
Pressing ENTER it is possible to enter the
sub menu; the
keys are used to
select YES or NO to enable/disable pressing.
Press ENTER to confirm settings.
MILK TIME (Milk Time):
It is possible to set the time and therefore, the
amount of milk.
Pressing ENTER
it is possible to enter the
sub menu; the
keys are used to
increase/reduce the amount of milk. Press ENTER
to confirm settings.
NO AIR TIME (Air Time disabled):
It is possible to set the part of total milk time in which
the air solenoid is closed so as to adjust the amount
of foam in the milk.
Pressing ENTER
it is possible to enter the
sub menu; the
keys are used to
increase/reduce the milk time for which the solenoid
valve is closed.
Press ENTER to confirm settings.
AUTOWASHING (Automatic milk tube wash):
It is possible to set the cold water washing time at the
end of milk dispensing.
Pressing ENTER
it is possible to enter the
sub menu; the
keys are used to
increase/reduce the washing time.
Press ENTER
to confirm settings.
To program the double dose, after entering the menu
for the required key:
Press the : key: it will be possible to pro-
gram the same list of functions for the double dose.
TEA (Tea time):
Pressing this
key from the cycle menu will
open the TEA cycle: press ENTER to open the sub-
menu; the
keys serve to increase/
reduce the time and therefore the volume of the
water. Press ENTER
to confirm settings.
MANUAL STEAM (Steam Time):
Pressing
key from the cycle menu will open
the MANUAL STEAM cycle; press ENTER to open
the submenu; the
keys serve to
increase/reduce the time of the steam. Press ENTER
to confirm settings.
AUTOSTEAM:
Pressing
key from the cycle menu will open
the AUTOSTEAM cycle; press ENTER to open
the submenu; the
keys serve to
increase/reduce the temperature that the beverage
being heated needs to reach. Press ENTER
to confirm settings.
X
COFFEE
To Next Page
Loading...
