52
EN
• PRE-BREWING (used to set the pre-brewing time)
• TAMPING (used to enable/disable pressing)
List of the functions that can be programmed for the
COFFEE MILK beverage:
• GRIND TIME (used to set the grinding time)
• GRIND SEL (used to set the default grinder)
• VOLUME CC (used to set the volume of water
in the coffee)
• PRE-BREWING (used to set the pre-brewing time)
• TAMPING (used to enable/disable pressing)
• MILK TIME (used to set the milk time/amount)
• NO AIR TIME (used to set the milk time/amount
without foam)
• AUTOWASHING (used to set the washing time
at the end of pouring)
List of the functions that can be programmed for the
CAFFELATTE beverage:
• GRIND TIME (used to set the grinding time)
• GRIND SEL (used to set the default grinder)
• VOLUME CC (used to set the volume of water
in the coffee)
• PRE-BREWING (used to set the pre-brewing time)
• TAMPING (used to enable/disable pressing)
• MILK TIME (used to set the milk time/amount)
• NO AIR TIME (used to set the milk time/amount
without foam)
• AUTOWASHING (used to set the washing time
at the end of pouring)
List of the functions that can be programmed for the
MACCHIATO beverage:
• MILK TIME (used to set the milk time/amount)
• NO AIR TIME (used to set the milk time/amount
without foam)
• AUTOWASHING (used to set the washing time
at the end of pouring)
• GRIND TIME (used to set the grinding time)
• GRIND SEL (used to set the default grinder)
• VOLUME CC (used to set the volume of water
in the coffee)
• PRE-BREWING (used to set the pre-brewing time)
• TAMPING (used to enable/disable pressing)
List of the functions that can be programmed for the
MILK beverage:
• MILK TIME (used to set the milk time/amount)
• NO AIR TIME (used to set the milk time/amount
without foam)
• AUTOWASHING (used to set the washing time
at the end of pouring)
TEA:
• TIME (used to set the time/amount of hot water)
MANUAL STEAM:
• TIME (used to set the time/amount of steam)
AUTOSTEAM:
• TEMPERATURE (used to set the temperature
for the beverage being heated)
GRIND TIME (Grinding Time):
It is possible to set the grinding time in seconds and
therefore, the amount of ground coffee used.
Pressing ENTER
it is possible to enter the
sub menu; the
keys are used to
increase/reduce grinding time.
Press ENTER to confirm settings.
GRIND SEL (Selects Default Grinder):
It is possible to set a default grinder (left LH or right
RH).
Pressing ENTER
it is possible to enter the
sub menu; the
keys are used to
select the right or left grinder.
Press ENTER to confirm settings.