EasyManua.ls Logo

Nuova Simonelli TALENTO - Cleaning and Maintenance

Nuova Simonelli TALENTO
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fig. 29
Fig. 28
60
EN
4. Press the following key:
6. Open the front hatch on the machine.
7. Insert the cleanser tablet (puly Caff) and close
the hatch.
CAUTION
RISK OF BURNS OR SCALDING
Set the machine to the Oenergy level.
Insert the key in the lock.
Turn the key to open the hatch anticlockwise.
Open the front hatch.
9.3 COFFEE HOLDER AND
COFFEE DELIVERY
UNIT CLEANING
Remove any coffee residues that may have
deposited on the sides of the conveyor using
the fine brush provided.
5. Keep pressing down on the key for about 6 sec-
onds until the display reads:
RESTORING AN INTERRUPTED WASH CYCLE
If the washing cycle is interrupted by cutting off power
to the machine, when it is switched on again, the
group will position itself in the standby phase and the
display will read:
1. Open the front hatch of the machine.
2. Place a detergent tab (Puly Caff) inside the
pouring chamber.
3. Use a damp cloth to wipe clean the shower head
on the top piston.
4. Close the front door on the machine.
AUTOwASHING
OPEN DOOR
INSERT CLEANSER
CLOSE DOOR
AUTOwASHING
OPEN DOOR
INSERT CLEANSER
CLOSE DOOR
8. Clean the shower head on the top piston with a
damp cloth.
9. Close the hatch.
The display will read:
NOTE: Dose keys are disabled during washing.
At the end of the wash cycle, the display will read:
Reposition a container with 1 litre of fresh water, and
press ENTER
, the machine will carry out a
rinse cycle and the display will read:
RINSE
PRESS ENTER
CLEANING
RINSE

Table of Contents

Other manuals for Nuova Simonelli TALENTO

Related product manuals