EasyManua.ls Logo

Nuova Simonelli TALENTO - Cleaning the Delivery Unit and the Milk Foamer

Nuova Simonelli TALENTO
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fig. 30
Fig. 33
Fig. 32
Fig. 31
Fig. 34
61
EN
Use a damp cloth and/or a little mild detergent
to clean the coffee bean bells.
Clean the drip container with hot, soapy water.
NOTA: The water collecting tray can be washed in
the dishwasher.
9.6 CLEANING THE WATER
COLLECTING TRAY
CAUTION
Never use any sort of solvent.
CAUTION
RISK OF BURNS OR SCALDING
If cleaned when the nozzle is still hot, avoid
touching it with bare hands.
Use a cloth dipped in hot water and/or a neutral
cleanser.
Clean the steam nozzle each time it is used to warm
up drinks.
9.4 CLEANING THE STEAM
NOZZLE
Wash the grid clean with a brush and hot water
and soap.
9.5 CLEANING THE DROP
COLLECTING TRAY
GRID
Use a small brush to clean any deposits or
coffee residues off the piston and the delivery
unit site or any other areas soiled with coffee.
9.7 CLEANING THE
GASKET

Table of Contents

Other manuals for Nuova Simonelli TALENTO

Related product manuals