6
Installation and Placement
Carefully unpack the NuStep from the
shipping container and transport the
product to the installation location.
Reposition and complete installation of
the electronics tube in accordance with
the provided assembly instructions.
To ensure safe and effective operation
of your NuStep, place on a fl at, stable
surface. Adjust leveler feet as required.
The minimum amount of required free
space around the equipment is 18 inches
for the sides, and 12 inches for the
front and rear. Additional free space is
necessary to accommodate wheelchair
access.
The T4r is very heavy; it
weighs 210 lbs (95 kg).
To avoid injury, or damage
to the product, always
obtain assistance to move
this product.
Use proper lifting
technique.
CAUTION
!
To Next Page
Loading...
