NuWave OXYPURE ZERO PLUS - Page 11

nuwavenow.com | 11
OPERATING THE OXYPURE
WIFI
Allows you to connect the OxyPure to your
Wi-Fi network.
1. Press and hold AUTO to initiate Wi-Fi
pairing function. See page 8 for details.
ECO MODE
Allows you to save energy by keeping
the Oxypure fan off until it’s needed. The
POWER button will be lit yellow.
1. Press and hold ULTIMATE CLEAN for
2 seconds to activate. The Power icon
backlight will be yellow while ECO MODE
is on.
2. Press and hold ULTIMATE CLEAN for 2
seconds again to deactivate ECO MODE.
SLEEP MODE
Allows your Oxypure fan to still be active
while the LED lights are turned off. Adjust the
fan speed to your preference prior to turning
on sleep mode.
1. Manually set FAN SPEED to desired
setting.
2. Press and hold FAN SPEED for 2 sec-
onds again to activate SLEEP MODE.
3. To turn off SLEEP MODE, press any
button.
NOTE: ULTIMATE CLEAN and TURBO will
work while the Oxypure is in SLEEP MODE.
AIR QUALITY INDICATOR
The OxyPure will automatically measure and
display the current air quality in the room.
The colored bars around AIR will illuminate,
increasing and decreasing according to air
quality. See page 9 for details on AIR/ODOR
QUALITY.
ODOR QUALITY INDICATOR
The OxyPure will automatically measure
and display the current odor quality in the
room. The colored bars around ODOR
will illuminate, increasing and decreasing
according to odor quality. See page 9 for
details on AIR/ODOR QUALITY.
MUTE
Press and hold TURBO until 2 beeps are
heard.
1. Repeat to unmute.
ODOR
NO
ODOR
STRONG
ODOR
WIFI
MUTE
CLEAN DIRT
Y
AIR
ECO MODE
SLEEP MODE