nuwavenow.com | 9
OPERATING THE OXYPURE
CONTROL PANEL • POWER • MODES & FUNCTIONS
AIR AND ODOR LEDS
The OxyPure will display the Air/Odor quality based on the particulate matter (PM) in the
air from low to high as represented below. If the PM level in the air exceeds the upper limit
of the range, a warning is triggered with a beeping sound and a ashing LED. To turn off
this warning, press AUTO and Fan Speed at the same time. Press the same buttons to turn
the warning feature back on.
(Low PM Level) (High PM Level)
ODOR
NO
ODOR
STRONG
ODOR
CLEAN FILTER 2/3
AIR
SLEEP MODE
AUTO
ULTIMATE
CLEAN
FAN
SPEED
TIMER TURBO
HR CLEAN DIRTYHRHIGHLOW
WIFI
ECO MODE
WIFI
RESET FILTER MUTE
OXY 350 BIO
date name rev #
09/27/23
350BIO
control panel
2
JO
CONTROL PANEL
The OxyPure’s control panel allows you to turn the unit on and off, choose an operating
mode or function (see below), and monitor your lter health.
Particulate Matter (PM) with a diameter of 2.5 microns or less
0~5 5~10 10~20 20~30 30~50 Over 50
Fan Speeds
1 2 3 4 5 6
Air/Odor Quality - Detects particles as small as 2.5/1000mm
(Low Fan Speed) (High Fan Speed)
Ozone Emission
Removal Filter
Pre Filter
Stainless Steel Pre-Filter:
Washable and reusable.
Captures and collects large
particles and allergens including
pet hair, dander, and pollen.
Bio-Guard
™
Filter:
Washable and reusable.
8,000V, charges particles either
positively or negatively to capture
as small as 0.1 microns including
smoke, pollen, and allergens.
Ozone Emission Removal
Filter:
Reusable. DO NOT wash.
Eliminate ozone emissions
and other harmful airborne
chemicals including VOCs and
formaldehyde.
Bio-Guard™
Filter
FILTER FUNCTIONS
Air purifiers operate more efficiently when all windows and doors are closed. The OxyPure
can purify the air in extra-largerooms.
To Next Page
Loading...
