12 | nuwavenow.com
Before First Use
Wipe the Top Vent and In Flow Vent with a slightly damp cloth or paper towel. Dry thoroughly
before use.
After Use
Your OxyPure should be cleaned periodically and after excessive use to ensure proper
performance and function. Be sure the OxyPure is off and unplugged.
Cleaning the Base of the OxyPure
Use a cloth, paper towel, duster, or vacuum brush attachment to remove dust and other
particles from the vents. Clean tougher buildup with a dampened cloth with soap and warm
water. Dry thoroughly.
1. At the back remove the Filter Slot Cover
using built-in handles or tabs.
2. Slide out the lter to be cleaned.
3. After washing allow the Filters to
thoroughly dry before re-inserting (12-24
hours)
• Ensure the Filter Slot Cover is properly
aligned and secure when reattaching.
CLEANING & MAINTENANCE
Your OxyPure can easily be moved from one location to
another. Just hold the OxyPure by the handles on each side
and roll the OxyPure to the chosen location. The wheels
underneath provide extra maneuverability and mobility
whenever it’s needed.
Handles
Wheels
CLEANING THE FILTERS
The filters need to be cleaned on schedule to maintain optimum performance.
1
2
3
4
To Next Page
Loading...
