BASS KNOB
Control the amount of low frequency.
DRIVE KNOB
Connect the amount of overdrive.
TREBLE KNOB
Control the amount of high frequency. Rotate TREBLE KNOB
clockwise to increase the high frequency; rotate TREBLE KNOB
counterclockwise to decrease the high frequency.
7 8
●Increase the volume without colored sound.
●Built-in two-band EQ control high and low frequency
separately.
●True bypass.
●Powered by AC adapter.
OVERVIEW
-REDO THE LOOP
l
You might want to redo the undo (twisted I know!) Press and
hold the footswitch again longer that 1.5s, this will redo the
loop that you just Undo.
l
When redoing the loop, LED indicator will flash quickly.
l
Stop Rec/Play, double press the footswitch, stop recording or
stat to play.
l
LED Indicator will flash in stop stauts to remain you the loop is
still stored and it is ready to go!
,
-ERASING
l
To erase the whole loop long press the footswitch in pause
status. Double press and hold the second step in Rec/Play
Status.
l
When LED indicator lights off. It means there is no loop now in
SOS. You could start to build a new loop. In this status. Foot
switch is for True by pass.
,
-STORE THE CURRENT LOOP
When the power of SOS off, SOS automatically save the loop from
last time. When you power SOS up again, LED indicator shows
green and flashes. Which means the loop from last time is still
available. Single press will start to play. If you need to record or
overdub, please refer to the previous section about them.
❖
❖
Weight: 173g
Dimensions: 94(L) X 53(W) X53(D) mm
❖
❖
Weight: 177.5g
Dimensions: 94(L) X 51(W) X53(D) mm
To Next Page
Loading...
Need help?
General
