12 | 4307 & 4310 Blower
Limitations on Use
Limitaon on Use Reason for Limitaon and/
or Risk
Correcve Acons
Operaon of the blower in an
explosive environment
Fire and/or explosion can
result
DO NOT USE
Using blower to move explo-
sive, toxic or dangerous gases
Fire and/or explosion can
result
Polluon of the environment
Health risks to operators
Liquid drawn into blower
intake
Blower seizure, damage to
blower and ejecon of parts
Install a moisture trap or
cyclonic separator on the
intake nozzle of the blower.
Operaon with the exhaust
or ballast blocked o.
Overheang Remove the blockage and
minimize restricon in the
exhaust or ballast circuits
Rotang blower in wrong
direcon
Damage to blower Change the direcon of ro-
taon of the drive or order
correct rotaon of blower.
Operang in excess of recom-
mended speed
Seizure of blower, damage to
blower and ejecon of parts
Operate the blower within
recommended speed range
Operang blower below
minimum speed
Seizure of blower, damage to
blower and ejecon of parts
Exceeding the maximum
pressure rise from blower
inlet to outlet
Overheat of Blower
Fire
Seizure of blower, damage to
blower and ejecon of parts
Check inlet and exhaust
restricons and reduce as
necessary.
Operang at excessively hot
inlet or ballast temperatures
Overheang
Fire
Seizure of Blower, damage to
blower and ejecon of parts
Monitor the inlet tempera-
ture and make correcons
to the system to bring tem-
perature within limits.
Operang at excessively cold
inlet temperatures.
Seizure of Blower, damage to
blower and ejecon of parts
Review precauons in cold
weather condions. Use
recommended lubricaon.
Operang above the exhaust
temperature upper limit
Overheang
Fire
Seizure of Blower, damage to
blower and ejecon of parts
Reduce the vacuum level in
high ambient condions.
Reduce the blower speed.
Remove restricons in the
intake and exhaust circuits.
Operang in excess of the
specied temperature rise
across the blower
Seizure of Blower, damage to
blower and ejecon of parts
Reduce the vacuum or pres-
sure level to bring within
limits.
nvesalesrep.com | 888.814.9191