NVE 4307 - Maintenance; Maintenance Schedule

22 | 4307 & 4310 Blower
Maintenance
· LOCK OUT any equipment before performing maintenance.
· Remove all pressure and vacuum from the system, i.e. discharge any
stored energy in the system.
· Allow the blower to cool to below 100°F before beginning work to
prevent burns.
MAINTENANCE SCHEDULE
CHECK PARAMETER
FREQUENCY
COMMENTSH D W M
VISUAL
Pressure 1
Blower
Running
Temperature 1
Load-Absorbed
Power
1
Noise 1
LUBRICATION
Oil Level 1
Blower
Shutdown
Oil Leakage 1
Viscosity 500
Oil Change-Inial 500
Oil Change-Normal 1000 6
FILTER
Vacuum 1 <1 in Hg
Clogging 2
DRIVETRAIN
Wear 2000
Blower
Shutdown
Belt Tension 2000
Belt Change 15000 24
RIGHT ANGLE
GEARBOX
Oil Change-Inial 500
Oil Change-Normal 1000 6
MOISTURE
TRAP/
SECONDARY
Drain Fluid 1
nvesalesrep.com | 888.814.9191