NVE 4307 - Page 36

36 | 4307 & 4310 Blower
ITEM QTY PART NUMBER DESCRIPTION
13 1 150-063-006 FLANGE, RETAINING 6" ADJ ELBOW
14 1 150-063-004 FLANGE, CHECK 4" 4310
15 1 150-616-001 GASKET, 4" SQ INTAKE CHECK
16 1 120-064-003 O-RING, 2-240 VITON
17 2 120-064-011 O-RING, 2-438 VITON
18 4 120-064-012 O-RING, 2-350 VITON
19 1 120-064-013 O-RING, 2-259 VITON
20 1 412-102-251 O-RING, 2-251, FPM
21 1 310-LP6 HOSE BARB, 1/4 TO 1/4NPT STRT
22 1 426-400-TAR-4-5IN HOSE, 4", TAR & ASPHALT-4-5 IN LG
23 1 426-400-TAR-5IN HOSE, 4", TAR & ASPHALT-5 IN LG
24 2 150-122-001 STANDOFF, 3/8 UNC X 2.6"L STL
25 1 150-644-001 BRACKET, CW 4-WAY 4310 EXH
25 1 150-644-003 BRACKET, CCW 4-WAY 4310 EXH
26 1 150-644-002 BRACKET, CW 4-WAY 4310 INT
26 1 150-644-004 BRACKET, CCW 4-WAY 4310 INT
27 1 410-004-002-NF VALVE, 4" 4-WAY, ASSEMBLY NO FLANGES
28 1 150-644-005 BRACKET, OIL FILL 4310, CW
28 1 150-644-006 BRACKET, OIL FILL 4310, CCW
29 1 440-001-051 FITTING, CAP, 3/4" JIC
30 1 440-001-050 FITTING, BULKHEAD, 3/4" JIC W/LOCKNUT
301 2 FSCS - 10-24 UNC X 0.50 FLAT SOCKET CAP SCREW - 10-24 UNC X
0.50
302 1 FSCS - 1/2-13 UNC X 1.25 FLAT SOCKET CAP SCREW - 1/2-13 UNC X
1.25 ZINC
303 16 HHCS - 5/16-18 UNC X 1.25 HEX HEAD CAP SCREW - 5/16-18 UNC X
1.25
304 6 HHCS - 5/16-18 UNC - 1.50 HEX HEAD CAP SCREW - 5/16-18 UNC - 1.50
305 4 HHCS - 5/16-18 UNC X 1.75 HEX HEAD CAP SCREW - 5/16-18 UNC X
1.75
306 2 HHCS - 3/8-16 UNC x 0.75 HEX HEAD CAP SCREW - 3/8-16 UNC x 0.75
307 4 HHCS - 3/ 8-16 UNC X 0.875 HEX HD CAP SCREW - 3/8-16 UNC X 0.875
308 5 HHCS - 1/2-13 X 1.50 HEX HEAD CAP SCREW - 1/2-13 UNC X 1.50
309 6 HHCS 1/2-13 UNC - 1.75 HEX HEAD CAP SCREW - 1/2-13 UNC - 1.75
310 4 SS - 5/16-18 UNC X 1.75 HEXAGON SOCKET SET SCREW - CUT POINT
ZINC
311
11 FW 1/2 USS FLAT WASHER 1/2" USS
312 30 LW - 5/16 LOCK WASHER, 5/16"
313 6 LW - 3/8 LOCK WASHER, 3/8"
314 11 LW - 1/2 LOCK WASHER, 1/2
315 2 PLUG - 1/4 NPT SH SOCKET HEAD PLUG - 1/4 NPT
316 1 PLUG - 1/2 NPT SH SOCKET HEAD PLUG - 1/2 NPT
nvesalesrep.com | 888.814.9191