EasyManua.ls Logo

nvent 910 Series - Page 8

nvent 910 Series
77 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8 | nVent.com
RAYCHEM 910 controller in an 8” x 10” stainless-steel
enclosure with window. 2-pole 30 A EMR. Controls a single
circuit with a 2-pole electromechanical relay.
(Approved for ordinary areas only)
910*E1SW*EMR2 10170-003 20
RAYCHEM 910 controller in an 8” x 10” stainless-steel
enclosure with window. 2-pole 30 A EMR. Controls a single
circuit with a 2-pole electromechanical relay. Includes an
isolated 2-wire RS-485 communication option.
(Approved for ordinary areas only)
910*E1SW*EMR2*485 10170-017 20
RAYCHEM 910 controller in an 8” x 10” stainless-steel
enclosure with window. 2-pole 30 A 277 V SSR. Controls a
single circuit with a 2-pole solid-state relay.
(Approved for Class I, Div. 2 areas)
910*E1SW*SSR2 10170-004 25
RAYCHEM 910 controller in an 8” x 10” stainless-steel
enclosure with window. 2-pole 30 A 277 V SSR. Controls a
single circuit with a 2-pole electromechanical relay. Includes
an isolated 2-wire RS-485 communication option.
(Approved for Class I, Div. 2 areas)
910*E1SW*SSR2*485 10170-018 25
RTD SENSORS
100-ohm platinum RTD with 10’ stainless-steel corrugated
sheath
RTD10CS RTD10CS 1.0
RTD, ambient, cable style MONI-RTD-200 254741 0.1
C1D1 RTD, –100°F to 900°F, pipe mounted RTD7AL RTD7AL 2.0
RTD, –100°F to 900°F, pipe mounted RTD4AL RTD4AL 1.2
OPTIONS
Append the following code(s) to the end of the standard Model Code to have the option
included at the factory
Option Code Description
*232
*MDM
RS-232 communications option (replace *485 with *232)
Modem communications option (replace *485 with *MDM)
*ALR
*ALG
Red LED pilot light
Green LED pilot light
Contact your local representative for configurations not listed here.

Table of Contents

Related product manuals