Setting Up the DGX-2 System
DGX-2 System User Guide
22
3. Accept all EULAs to proceed with the installation.
The system boots and you are prompted to configure the DGX-2 software.
4. Perform the steps to configure the DGX-2 software.
● Select your language and location.
● Create a user account with your name, username, and password.
You will need these credentials to log in to the DGX-2 System as well as to log in to
the BMC remotely. When logging in to the BMC, enter your username for both the
User ID as well as the password. Be sure to create a unique BMC password at the
first opportunity.
CAUTION: Once you create your login credentials, the default admin/admin login will
no longer work.
Note: The BMC software will not accept "sysadmin" for a user name. If you create this
user name for the system log in, "sysadmin" will not be available for logging in to the
BMC.
● Choose a primary network interface for the DGX-2 System; for example, enp6s0.
This should typically be the interface that you will use for subsequent system
configuration or in-band management.
Note: After you select the primary network interface, the system attempts to configure
the interface for DHCP and then asks you to enter a hostname for the system. If DHCP
is not available, you will have the option to configure the network manually. If you
need to configure a static IP address on a network interface connected to a DHCP
network, select Cancel at the Network configuration – Please enter the
hostname for the system screen. The system will then present a screen with the
option to configure the network manually.
● Choose a host name for the DGX-2 System.
After completing the setup process, the DGX-2 System reboots automatically and
then presents the login prompt.
5. Update the software to ensure you are running the latest version.
Updating the software ensures your DGX-2 System contains important updates,
including security updates. The Ubuntu Security Notice site (https://usn.ubuntu.com/
)
lists known Common Vulnerabilities and Exposures (CVEs), including those that can be
resolved by updating the DGX OS software.
a) Run the package manager.
To Next Page
Loading...
Need help?
General
