Nvidia DGX-2 SYSTEM User Manual

Using DGX-2 System in KVM Mode
DGX-2 System User Guide
88
A.4. Installing Docker Containers
This method applies to Docker containers hosted on the NVIDIA NGC Container
Registry, and requires that you have an active NGC account.
1. On a system with internet access, log in to the NGC Container Registry by entering the
following command and credentials.
$ docker login nvcr.io
Username: $oauthtoken
Password: apikey
Type “$oauthtoken” exactly as shown for the Username. This is a special username
that enables API key authentication. In place of apikey, paste in the API Key text that
you obtained from the NGC website.
2. Enter the docker pull command, specifying the image registry, image repository, and
tag:
$ docker pull nvcr.io/nvidia/repository:tag
3. Verify the image is on your system using docker images.
$ docker images
4. Save the Docker image as an archive. .
$ docker save nvcr.io/nvidia/repository:tag > framework.tar
5. Transfer the image to the air-gapped system using removable media such as a USB flash
drive.
6. Load the NVIDIA Docker image.
$ docker load –i framework.tar
7. Verify the image is on your system.
$ docker images
.

Nvidia DGX-2 SYSTEM Specifications

General

Brand	Nvidia
Model	DGX-2 SYSTEM
Category	Computer Hardware
Language	English