•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Revision Date Description
mstfwtrace Utility: Added the following
options:
"--gvmi" and "--ignore_old_events"
Using mstconfig to Split a Port in a Remotely
Managed Switch
3.4 Mar. 2019 Converted to online html format; some reorganization.
Dec. 2, 2018 Added the following sections:
mstarchive - Binary Files Compression Tool
Using mstconfig to Split a Port in a Remotely
Managed Switch
mstcongestion - Tool for Setting Congestion
Mode and Action
mstprivhost
3.3 Sept. 26, 2018 Updated section “Command Parameters” on page 80.
Added the following note to the “bb” option:
Note: The MFT 'bb' option is an advanced flag used
ONLY for production flows. It is NOT recommend to
use it as it can cause unrecoverable firmware burning
failures.
July 4, 2018 Updated the following sections:
Examples of mst Usage - FreeBSD
Supported Configurations and their
Parameters:
Added the following parameters:
BOOT_UNDI_NETWORK_WAIT, MKEY_BY_NAME,
ECPF_ESWITCH_MANAGER,
ECPF_PAGE_SUPPLIER,
FLEX_PARSER_PROFILE_ENABLE,
FLEX_IPV4_OVER_VXLAN_PORT,
SAFE_MODE_THRESHOLD and
SAFE_MODE_ENABLE
Updated mstfwreset Synopsis
Added table Impact of Secure Firmware on MFT to
section Secure Firmware Update
Added the following sections:
Re-Signing a Binary Image File
mstfwreset for SmartNICs
Added items to section mstfwreset Limitations
3.2 Mar. 1, 2018 Added the following sections:
For 5th Generation Devices
Updated the following sections:
Querying the Device Configuration
mstconfig create_conf Command
Signing Binary Image Files
mget_temp Usage
mstlink Usage
Supported Configurations and their
Parameters: Added the following parameters:
SW_RECOVERY_ON_ERRORS
RESET_WITH_HOST_ON_ERRORS
IBM_TUNNELED_ATOMIC_EN
EXP_ROM_PXE_ENABLE
EXP_ROM_UEFI_x86_ENABLE
To Next Page
Loading...
Need help?
General