EasyManuals Logo

Nvidia MSTFLINT Documentation

Nvidia MSTFLINT
123 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #91 background imageLoading...
Page #91 background image
91
1.
2.
3.
4.
Appendixes
mstflint - Updating Firmware Using ethtool/devlink and .mfa2 File
mstflint - Updating Firmware Using ethtool/devlink
and .mfa2 File
In order to flash the firmware on the device using ethtool, you need to prepare a .mfa2 firmware
file using the mstarchive tool - seemstarchive – Binary Files Compression Tool. Note that mstarchive
requires installing mstflint with--enable-fw-mgroption.
To perform firmware upgrade using ethtool/devlink, follow the steps below:
Run the mstarchive tool to generate the .mfa2 file (the following example assumes MFA2
v1.1.1).
# mstarchive -v 1.1.1 --bins-dir <source binaries directory> --out-file /lib/firmware/<file_name>.mfa2
Obtain the interface name of the adapter for which you wish to update firmware. For
example, you can useifconfig -a.
# ifconfig -a
...
p5p1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether ec:0d:9a:48:af:2a txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
p5p2: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether ec:0d:9a:48:af:2b txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
...
Burn the firmware using the .mfa2 image with ethtool/devlink.Please use the .mfa2 file path
relative to /lib/firmware.
ethtool command:
# ethtool -f <interface name> <file_name>.mfa2
devlink command:
$ devlink dev flash <dev> file <file_name>.mfa2
Query the adapter to verify that the new firmware version has been loaded following.
# lspci -n | grep 15b3
04:00.0 0207: 15b3:1017
04:00.1 0207: 15b3:1017
# mstflint -d 04:00.0 q
Image type: FS4
FW Version: 16.26.0292
FW Version(Running): 16.25.1020
FW Release Date: 9.9.2019
Product Version: 16.26.0292
Rom Info: type=UEFI version=14.19.13 cpu=AMD64
type=PXE version=3.5.802 cpu=AMD64
Description: UID GuidsNumber
Base GUID: 248a0703009e950c 4
Base MAC: 248a079e950c 4

Table of Contents

Other manuals for Nvidia MSTFLINT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nvidia MSTFLINT and is the answer not in the manual?

Nvidia MSTFLINT Specifications

General IconGeneral
BrandNvidia
ModelMSTFLINT
CategoryTools
LanguageEnglish