Nvidia Quadro FX 4800 - Page 82

NVIDIA Corporation
78 Quadro FX 4800/5800 and Quadro CX SDI User’s Guide– Version 1.0
C
HAPTER 5
API Control
* the incoming sync signal (either Composite or SDI). If
* NV_CTRL_GVO_SYNC_MODE is FREE_RUNNING, this attribute has no
* effect.
*/
#define NV_CTRL_GVO_SYNC_SOURCE 69 /* RW- */
#define NV_CTRL_GVO_SYNC_SOURCE_COMPOSITE 0
#define NV_CTRL_GVO_SYNC_SOURCE_SDI 1
NV_CTRL_GVO_OUTPUT_VIDEO_FORMAT
/*
* NV_CTRL_GVO_OUTPUT_VIDEO_FORMAT - specifies the output video
* format. Note that the valid video formats will vary depending on
* the NV_CTRL_GVO_SYNC_MODE and the incoming sync video format. See
* the definition of NV_CTRL_GVO_SYNC_MODE.
*
* Note that when querying the ValidValues for this data type, the
* values are reported as bits within a bitmask
* (ATTRIBUTE_TYPE_INT_BITS); unfortunately, there are more valid
* value bits than will fit in a single 32-bit value. To solve this,
* query the ValidValues for NV_CTRL_GVO_OUTPUT_VIDEO_FORMAT to check
* which of the first 31 VIDEO_FORMATS are valid, then query the
* ValidValues for NV_CTRL_GVO_OUTPUT_VIDEO_FORMAT2 to check which of
* the VIDEO_FORMATS with value 32 and higher are valid.
*/
#define NV_CTRL_GVO_OUTPUT_VIDEO_FORMAT 70 /* RW- */
#define NV_CTRL_GVO_VIDEO_FORMAT_NONE 0
#define NV_CTRL_GVO_VIDEO_FORMAT_480I_59_94_SMPTE259_NTSC 1
#define NV_CTRL_GVO_VIDEO_FORMAT_576I_50_00_SMPTE259_PAL 2
#define NV_CTRL_GVO_VIDEO_FORMAT_720P_59_94_SMPTE296 3
#define NV_CTRL_GVO_VIDEO_FORMAT_720P_60_00_SMPTE296 4
#define NV_CTRL_GVO_VIDEO_FORMAT_1035I_59_94_SMPTE260 5
#define NV_CTRL_GVO_VIDEO_FORMAT_1035I_60_00_SMPTE260 6
#define NV_CTRL_GVO_VIDEO_FORMAT_1080I_50_00_SMPTE295 7
#define NV_CTRL_GVO_VIDEO_FORMAT_1080I_50_00_SMPTE274 8
#define NV_CTRL_GVO_VIDEO_FORMAT_1080I_59_94_SMPTE274 9
#define NV_CTRL_GVO_VIDEO_FORMAT_1080I_60_00_SMPTE274 10