Nvidia Quadro FX 4800 - Adjusting the Desktop Area

NVIDIA Corporation
22 Quadro FX 4800/5800 and Quadro CX SDI User’s Guide– Version 1.0
C
HAPTER 3
Windows–Using the Graphics to SDI Control Panel
Advanced Adjustments
Thissectiondescribesthefollowingadditionalsettingsthatyoucancontrolusingthe
GraphicstoSDIOutputpage:
• “AdjustingtheDesktopArea”onpage 22
• “ApplyingGammaCorrection”onpage 24
• “SettingUptheColorSpaceConversion”onpage 25
• “SynchronizingtheSDIOutputtoanExternalSource”onpage 20
Adjusting the Desktop Area
Bydefault,theentiredesktopisconvertedtoSDIoutput.Ifthedesktopissmallerthanthe
sizeoftheSDIoutput,itwillbescaledtofit.IfthedesktopislargerthantheSDIoutput,it
willbecroppedtofit.
Insteadofusingtheentiredesktop,youcan
specifyaregionofthedesktoptoconvertto
SDIoutputasfollows:
1 FromtheNVIDIAControlPanelnavigationtreepane,underWorkstation,clickSend
graphicstoSDIoutput.
2 ClicktheChangeDesktopRegionbar.