Nvidia Quadro FX 4800 - Applying Gamma Correction

NVIDIA Corporation
24 Quadro FX 4800/5800 and Quadro CX SDI User’s Guide– Version 1.0
C
HAPTER 3
Windows–Using the Graphics to SDI Control Panel
Applying Gamma Correction
Tospecifythegammacorrectiontouseforthesourcestream:
1 FromtheNVIDIAControlPanelnavigationtreepane,underWorkstation,clickSend
graphicstoSDIoutput.
2 ClicktheColorSettingsbartoopentheColorSettingsdialogbox.
3 ClicktheGammaCorrectiontab.
4 SpecifytheRGBGammavaluesusingone
ormoreofthefollowingmethods:
• ClickanddrageachR,G,orBslidertotheappropriatevalue.
• EntertheR,G,orBvalueintherespectiveboxesorusetheupanddownarrows.
Tokeepallgammachannelsatthesamevaluewhileyouadjustthemsimultaneously,

clicktheLockallchannelscheckbox.
5 ClickOKwhenfinished.