EasyManuals Logo

Nvidia Quadro K4000 User Manual

Nvidia Quadro K4000
49 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
Quadro K4000/K5000/K6000 SDI DU-05337-002_v01
|
18
Chapter 03 : Windows–Using the Graphics to SDI Control Panel
To synchronize the frame rate of the SDI output to the external signal using frame
lock, select Frame-accurate synchronization using this format, then click the
list arrow and choose from the list of available SDI signal formats.
To introduce a delay in the SDI output, enter the pixel or line delay values in the
appropriate HSYNC or VSYNC delay boxes.
See “Synchronizing the SDI Output to an External Source” on page 19 for additional
information.
4 Check the Terminate the analog signal at this connector check box if
the system is a standalone system synchronized to a house sync signal, or
the system is the last in a chain of systems connected to the same house sync signal.
5 Choose the SDI output data format by clicking the SDI output format list arrow and
then selecting from the list of available color formats.
6 Click OK when done to close the dialog box.
7 Click Apply.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nvidia Quadro K4000 and is the answer not in the manual?

Nvidia Quadro K4000 Specifications

General IconGeneral
CUDA Cores768
GPU Memory3 GB GDDR5
Memory Interface192-bit
Memory Bandwidth134 GB/s
Maximum Power Consumption80 W
Form FactorSingle-slot
Display Connectors2x DisplayPort, 1x DVI