Direction Description and OPN Designation
Power side inlet to connector side outlet. Blue dots are
placed on the power inlet side.
Package Contents
Before installing your new system, unpack it and check against the parts list below that all
the parts have been sent. Check the parts for visible damage that may have occurred
during shipping.
The SN5400/SN5600 package content is as follows:
1 x System
1 x Rail kit
2 x Power cables for each power supply unit – Type C20 to C19
1 x Harness: HAR000028 – Harness RS232 2M cable – DB9 to RJ-45
2 x Cable retainers for each power supply unit
Warning
To Next Page
Loading...
