Troubleshooting
Problem
Indicator
Symptoms Cause and Solution
LEDs
System Status
LED is blinking
for more than 5
minutes
Cause: The operating system did not boot properly,
and only firmware is running.
Solution: Connect to the system via the console port,
and check the software status. For further
instructions, see Monitoring and Troubleshooting in
the Cumulus Linux User Guide.
System Status
LED is Amber
Cause:
Critical system fault (CPU error, bad firmware)
Over temperature
Solution:
Check environmental conditions (room
temperature)
Fan Status LED
is Amber
Cause:
Possible fan issue
Solution:
Check that the fan is fully inserted and nothing
blocks the airflow
Replace the fan FRU if needed
PSU Status LED
is Amber
Cause:
Possible PSU issue
Solution:
Check/replace the power cable
Replace the PSU if needed
To Next Page
Loading...
