NXP Semiconductors FRDM-KL25Z User Manual

Copyright © 2015 ARM Ltd. All rights reserved.
Quick Start Guide
NXP FRDM-KL25Z
Install Keil MDK Version 5
 Download and install the MDK Core from www.keil.com/mdk5/install
Add Software Pack using the Pack Installer
 Keil::Kinetis_Kxx_DFP – Freescale Kinetis KLxx Series Device Support
Power up the board
 Connect a USB power supply to the Power / OpenSDA Mini-USB receptacle
Verify Installation
 Copy an example using the Pack Installer. Compile, download to Flash, and debug the application. The
provided examples are ready to run.
 Or download examples that apply to this board www.keil.com/dd2/freescale/mkl25z128xxx4
More Information
 Board Information www.keil.com/boards2/freescale/frdm_kl25z
Related Products
 MDK Version 5 www.keil.com/mdk5
 Getting Started User’s Guide www.keil.com/gsg
 MDK-Professional Middleware www.keil.com/middleware
 Learning Platform www.keil.com/learn

NXP Semiconductors FRDM-KL25Z Specifications

General

Brand	NXP Semiconductors
Model	FRDM-KL25Z
Category	Motherboard
Language	English

Summary

Install Keil MDK

Download MDK Core

Download and install the Keil MDK Core software package.

Add Software Pack

Install the Keil::Kinetis_Kxx_DFP for device support.

Board Setup and Verification

Power Up Board

Connect a USB power supply to the designated Mini-USB receptacle.

Verify Installation

Compile and debug an example using the Pack Installer.

Information Resources

Board Information

Access detailed information about the FRDM-KL25Z board.

Related Products

Links to MDK Version 5, User's Guide, Middleware, and Learning Platform.

Debug Configuration

Debug with CMSIS-DAP

Configure the debugger to use CMSIS-DAP, setting Port to SW.