NXP Semiconductors MPC57 Series - User Manual

© 2019 NXP Semiconductors. All rights reserved
Model-Based Design Toolbox
MPC57xx Series
Quick Start Guide
An Embedded Target for the MPC57xx Family of Processors
Version 3.0.0
Target Based Automatic Code Generation Tools
For MATLAB™/Simulink™/Stateflow™ Models working with Simulink Coder ™ and Embedded Coder®

NXP Semiconductors MPC57 Series Specifications

General

Manufacturer	NXP Semiconductors
Category	Microcontroller
Core Architecture	Power Architecture
Flash Memory	Up to 4 MB
Package	LQFP, BGA
Series	MPC57
Core Count	Single-core, Dual-core
Operating Temperature	-40°C to +125°C
Communication Interfaces	CAN, LIN, SPI, Ethernet
Analog-to-Digital Converter	10-bit, 12-bit

Summary

1 Installation

1.1 System Requirements

Specifies minimum PC platform requirements for the Model-Based Design Toolbox.

1.2.1 Run Add-on installer

Guides through executing the MATLAB toolbox package file (*.mltbx) for installation.

1.2.2 License Registration & Installation

Details obtaining and installing the required license file for the Model-Based Design Toolbox.

1.2.3 Setting up the Target Compilers

Explains configuring system environment variables for target compilers.

1.2.4 Setting the Path for Model-Based Design Toolbox

Describes how to set the MATLAB path for the Model-Based Design Toolbox.

2 Run Models

2.1 Examples Library & Help

Introduces the examples library for testing MCU modules and running applications.

2.2 Hardware Setup

Provides instructions for setting up the DEVKIT-MPC5744P for communication.

2.3 BootLoader Setup

Details flashing the RBF bootloader image onto the MCU's flash memory.

2.4 Hello World Example

Guides running the basic UART "Hello World" example on the MPC5744P MCU.