NXP Semiconductors PN7160 User Manual

UM11496
PN7160 evaluation board
Rev. 1.3 — 24 November 2022 User manual
Document information
Information Content
Keywords OM27160, PN7160, PN7161, evaluation kit
Abstract This document is the user manual of the PN7160/PN7161 evaluation board.

NXP Semiconductors PN7160 Specifications

General

NFC Controller	PN7160
Operating Modes	Reader/Writer, Card Emulation, Peer-to-Peer
Package	HVQFN40
Interface	I2C
Supported NFC Forum Tags	Type 1, Type 2, Type 3, Type 5
Supported Standards	ISO/IEC 14443, ISO/IEC 15693, FeliCa

Summary

Revision History

Introduction to the PN7160 Evaluation Board

OM27160 Board Overview

OM27160 Board Details

Schematics

Circuit diagrams detailing the electronic components and connections of the OM27160A1HN board.

Layout Details

Components Layers

Visual representation of component placement on the OM27160 board.

Layer 1

Detailed view of the first copper layer of the OM27160 board's PCB.

Layer 2

Detailed view of the second copper layer of the OM27160 board's PCB.

Layer 3

Detailed view of the third copper layer of the OM27160 board's PCB.

Layer 4

Detailed view of the fourth copper layer of the OM27160 board's PCB.

Additional Information

Using Different I2C Address

Instructions for changing the default I2C address of the PN7160 on the evaluation board.

Using in Another System

Guidance on reusing the OM27160 board in different host systems.

References

Radio Equipment Directive (RED)

Legal Information

Definitions

Definitions of terms used within the document, such as 'Draft'.

Disclaimers

Legal disclaimers regarding warranty, liability, and product usage.

Licenses

Information regarding licensing of NXP ICs with NFC technology.

Trademarks

Notice about NXP and third-party trademarks used in the document.