NXP Semiconductors
UM11496
PN7160 evaluation board
6 References
[1] The OM29110 Interface boards are used to connect NFC’s demo boards (e.g.
OM5579 related to PN7150 NFC controller or OM27160 related to PN7160 NFC
controller) to Single-Board-Computer (like Raspberry Pi, BeagleBone, or board
featuring Arduino header).
More details in the related UM10956 - OM29110 NFC's SBC interface boards user
manual: https://www.nxp.com/doc/UM10956
UM11496 All information provided in this document is subject to legal disclaimers. © 2022 NXP B.V. All rights reserved.
User manual Rev. 1.3 — 24 November 2022
13 / 19
To Next Page
Loading...
