Need help?Do you have a question about the NXP Semiconductors LPCXpresso55S69 and is the answer not in the manual?
General| Brand | NXP Semiconductors |
|---|---|
| Model | LPCXpresso55S69 |
| Category | Motherboard |
| Language | English |
Specifies required software versions for debugger operation.
Guides on establishing debug sessions using MCUXpresso IDE.
Details installation steps for Keil and IAR tools with the on-board probe.
Outlines how to debug using an external debug probe.
Describes the status indicator LED for the Link2 debug probe.
Explains how to update or reprogram the Link2 debug probe firmware.
Details the Virtual COM port feature of the Link2 debug probe.
Outlines how to use the Link2 probe to debug external target MCUs.
Covers board power inputs and specific 1.8V operation considerations.
Details the USB interfaces available on the LPCXpresso board.
Describes the header providing serial-to-USB connectivity for USART.
Details the on-board audio codec and micro SD card slot interfaces.
Covers the accelerometer, RGB LED, and user buttons on the board.
Describes the Mikroe Click and PMod expansion connector interfaces.
Details the Arduino UNO R3 compatible expansion connector.
Explains the ADC reference voltages and input connections.
Discusses BOD triggering during boot due to specific silicon revisions.
Clarifies the support for SPI ISP mode on specific pins.
Notes issues with minimum power supply rise time specifications.
Specifies the recommended laboratory operating temperature range.
To Next Page