1.2.2 License Registration & Installation
The NXP’s Model Based Design Toolbox is available free of charge, however, a license is
required. If you need to get a license it can be obtained by following the path outlined below.
If you encounter issues getting a license please submit a ticket at
https://www.nxp.com/support/support:SUPPORTHOME describing the issue.
Please perform the following steps to obtain your license:
1. Go to www.nxp.com/mbdt and click on “Download Eval”
2. Once you have logged in, the “Product Information” page for Model-Based
Design Toolbox appears.
Select the appropriate toolbox you wish you evaluate to bring up the Software Terms
and Conditions page.
3. Click “I Agree” to consent to the software license agreement.
4. If you need to download the tool, click on the linked file name. Otherwise, click on
“License Keys” tab.
5. Verify the correct tool is identified and click on “Generate”.
6. Enter your Disk Serial Number as the Host ID. If you do not know your Disk
Serial Number, go to “Locating the Host ID” in the document Model-Based
Design Toolbox License Installation to learn how to locate your Disk Serial
Number, which is needed to generate your license.
7. Click “Generate”
8. Either click on “Save All” or copy and paste the file into a text editor and save the
file as “license.lic” to the folder “..\MATLAB\Add-
Ons\Toolboxes\NXP_MBDToolbox_MPC57xx\code\lic”
To Next Page
Loading...
