4. When powered through USB, LEDs DS1, DS2 and DS5 should light green;
2.3 BootLoader Setup
To be able to download the applications from MATLAB/Simulink to the target we need to
program a special application called RBF into the MCU flash memory. For the first time
programming you need to have the S32 Design Studio for PA IDE installed. Follow the next
steps to flash the RBF image to the processor flash memory.
1. Click on the Flash icon to open the wizard that allows you to connect with the target and
flash the boot loader algorithm
2. The Flash Wizard will appear on your screen. Add a new configuration and name if RBF
Flash.
To Next Page
Loading...
