NXP Semiconductors S32K3X4EVB-Q172 User Manual

S32K3X4EVB-Q172
Customer Evaluation Board for S32K3x4 MCUs
Hardware User Manual
S32K3X4EVB-Q172
S32K3X4EVB-S172

NXP Semiconductors S32K3X4EVB-Q172 Specifications

General

Brand	NXP Semiconductors
Model	S32K3X4EVB-Q172
Category	Motherboard
Language	English

Summary

Definitions, Acronyms, and Abbreviations

Block Diagram

Features

Default Configuration

Startup

Power Supply

Main Power Supply

Main power supply input connector details and specifications.

+5.0 Volts Power Supply

+5.0V output from FS26x SBC to main P5V0 domain.

+3.3 Volts Power Supply

+3.3V switching supply to main P3V3 domain for board operations.

VDD_HV_A Power Supply

VDD_HV_A primary I/Os supply voltage domain configuration.

Programming and Debug Interface

RESET Switch and LED Indicator

RESET switch and LED indicator function for S32K3 MCU reset state.

On-board Debugger

On-board Debugger and JTAG connectors for serial and debug communications.

LIN Interface

CAN Interface

Ethernet Interface

Ethernet MII/RMII Interface

Ethernet interface on S32K3X4EVB-S172 with MII/RMII connectivity.

10/100 T-Base Ethernet Phy

10/100 T-Base Ethernet Physical Layer with RJ45 connector for the evaluation board.

QSPI-A Interface

User Peripherals

User RGB LED Indicator

Single active high user RGB LED connected to MCU ports for status.

User Pushbuttons

Two push-buttons connected to MCU ports for user input and control.

ADC Rotary Potentiometers

ADC Rotary Potentiometers connected to ADC channels for analog input.

Default Jumpers

Revision History

Legal Information

Definitions

Definitions for document terms, including draft status implications.

Disclaimers

Warranty, liability, changes, applications, and automotive suitability.

Trademarks

NXP trademarks and acknowledgement of third-party trademarks.