36
SINGLE UNIT HOME SCREEN
OPERATING WITH MASTER CONTROLS
SINGLE UNIT HOME SCREEN
OPERATING AS A SINGLE UNIT (IN DEFROST)
SINGLE UNIT HOME SCREEN
DISPLAYING ALARM STATUS
SINGLE UNIT ALARM SCREEN
4) The master controls will keep reevaluating these
conditions and calling units as necessary to achieve
the desired rise in the desired amount of time
5) If you nd that the units are not turning on fast
enough to meet building demand change the
“System Timer” to a smaller value in order to have
units turn on quicker
6) If you nd that too many units are turning on and
meeting the building demand very quickly (almost in
a manner of short cycling) you should try increasing
the “Tank Di Set” value so that additional units will
only turn on as needed
SLAVE SCREENS
SINGLE UNIT CONFIGURATION SCREEN
To Next Page
Loading...
