Get started
O
2
user guide 10
Step three:
Set up
• Switch on your Xda by pressing the power
button. (The Xda may have automatically
come on while charging)
• You will be presented with a welcome screen
which will prompt you to
‘Tap the screen to
set up your Pocket PC’. Do this and follow
the on-screen instructions
This gets your Xda’s screen aligned so that it can
respond accurately to touches of the stylus. You
will also be taken through a brief tutorial on
how to use the screen’s functions.
Step five:
Auto Config
• Once you have activated your SIM card an
Auto Configuration screen will appear
• Select ‘Yes’ to obtain the following screen:
• With ‘O2-UK’ selected in the drop down
menu, tap ‘Ok’ in the top right hand corner
You will then be prompted to restart you Xda.
• Select ‘yes’
You have now finished setting up your Xda.
Time to put it to good use...
9O
2
user guide
Step four:
Enter PIN
Once you have completed the set up process
you will see the following screen:
• Enter your pre-set SIM PIN followed
by ‘Enter’
Please note
If you enter the wrong PIN three times, the SIM
card will be blocked automatically. You will not
be able to make or receive calls until it has been
unblocked. To unblock your SIM card contact
your service provider.
To Next Page
Loading...
Need help?
General
