15
LEG ANGLE ADJUSTMENT
For stable support when shooting
on uneven terrain, each leg can
be adjusted to a preset angle of
22.5°–24°, 50°, or 80°. To set the
leg angle, do the following:
1. Press and hold the leg angle
adjustment lock.
2. Set the angle of the leg to one of
the three preset positions.
3. Release the lock to secure the
leg at the desired angle.
CENTER COLUMN ADJUSTMENT
The center column can be used to
adjust the height of the camera.
Fully extending the center
column after the legs have been
completely extended will place
the camera at the highest position
possible with this tripod.
1. Turn the locking collar
counterclockwise to unlock the
center column.
2. Adjust the center column to the
desired height.
3. Lock the column in place
by turning the locking collar
clockwise.
OPERATION
To Next Page
Loading...
Need help?
General
