16
Tripod Operation (continued)
AT/CT-3535, AT-3585
1. If more height is needed, turn the center column twist
lock counterclockwise and extend the upper center
column to the desired height.
2. Turn the twist lock clockwise to secure the column.
Note: Make sure the column is secure, but do not overtighten to
avoid damaging the tripod.
LOW-ANGLE SETUP
The following instructions describe three ways to adjust
the tripod for low-angle shots.
Using the Center Column
1. Set the angle of the tripod legs to 80°.
2. Loosen the locking collar and adjust the center column
to its lowest height possible.
3. Mount the camera on the ballhead.
OPERATION
To Next Page
Loading...
Need help?
General
