20
OPERATION
SPIKED FEET
The rubber non-skid feet are for
use indoors or on flat surfaces.
Spikes are for soft ground, grass,
sand, and uneven terrain.
To expose the spikes, follow these
steps:
AT-3535 and CT-3535:
Remove the rubber feet by pulling
them o. Adjust the leg height
according to your needs.
AT-3565 and AT-3585:
1. Turn the retractable rubber feet
clockwise. Adjust the leg height
to your needs.
2. When finished using the
spikes, turn the rubber feet
counterclockwise until they are
extended all the way out and
completely cover the spikes.
INTEGRATED MONOPOD
The leg with the extra rubber
grip at the top of the shaft can be
removed and used as a monopod.
To assemble the monopod, follow
these steps:
1. Unscrew the monopod leg from
the tripod.
2. Unscrew the weight hook from
the center column.
Tripod Operation (continued)
To Next Page
Loading...
Need help?
General
