Need help?Do you have a question about the Oberheim Matrix-6 and is the answer not in the manual?
Detailed procedures for calibrating the synthesizer's HFOs, VCF, VCA, and DAC.
Specifies voltage requirements for memory retention and power on/off states.
Introduces new features and changes in software revision 2.13.
Details corrections and additions to the original owner's manual.
Explains MIDI communication, notes, and controllers for the synthesizer.
Details the function and assignment of MIDI controllers like levers and pedals.
Describes how patch changes are handled via MIDI in split and single modes.
Explains the "SEND ALL" command for transmitting patch and split data.
Details the MIDI Echo feature for combining MIDI inputs and outputs.
Explains the Spillover feature for note transmission across MIDI channels.
Describes the Active Sense MIDI function for maintaining MIDI connection integrity.
Explains how to remap MIDI patch changes for flexible control.
Controls the activation of the Patch Mapping feature.
Allows the construction of the Patch Map Table for MIDI remapping.
Manages simultaneous patch changes across multiple MIDI devices.
Enables monophonic MIDI note reception on separate channels per voice.
Introduces new parameters for Master Edit, including Transpose and Squick.
Details changes in operation and software version information.
Displays the current operating software version of the MATRIX-6.
Detailed procedures for calibrating the synthesizer's HFOs, VCF, VCA, and DAC.
Specifies voltage requirements for memory retention and power on/off states.
Introduces new features and changes in software revision 2.13.
Details corrections and additions to the original owner's manual.
Explains MIDI communication, notes, and controllers for the synthesizer.
Details the function and assignment of MIDI controllers like levers and pedals.
Describes how patch changes are handled via MIDI in split and single modes.
Explains the "SEND ALL" command for transmitting patch and split data.
Details the MIDI Echo feature for combining MIDI inputs and outputs.
Explains the Spillover feature for note transmission across MIDI channels.
Describes the Active Sense MIDI function for maintaining MIDI connection integrity.
Explains how to remap MIDI patch changes for flexible control.
Controls the activation of the Patch Mapping feature.
Allows the construction of the Patch Map Table for MIDI remapping.
Manages simultaneous patch changes across multiple MIDI devices.
Enables monophonic MIDI note reception on separate channels per voice.
Introduces new parameters for Master Edit, including Transpose and Squick.
Details changes in operation and software version information.
Displays the current operating software version of the MATRIX-6.
General| Polyphony | 6 voices |
|---|---|
| Oscillators | 2 DCOs per voice |
| Keyboard | 61 keys |
| Memory | 100 patches |
| MIDI | Yes |
| Type | Analog |
| Year Released | 1985 |
| Envelopes | 3 |
To Next Page
